right hand footprint left hand footprint (number of pins x .050?) + .015? interconnects .050? grid surface mount headers and sockets www.mill-max.com 516-922-6000 72 series 850, 851 852, 853 right hand footprint left hand footprint (number of pins x .050?) + .015? ordering information footprint (number of pins x .050?/2) + .015? footprint (number of pins x .050?/2) + .015? double row socket, even # of pins 853-xx-_ _ _-30-001000 fig. 4 specify even # of pins 004-100 single row socket, right hand footprint even # of pins 851-xx-0_ _-30-002000 fig. 3r specify even # of pins 02-50 single row socket, left hand footprint odd or even # of pins 851-xx-0_ _-30-001000 fig. 3l specify # of pins 01-50 double row header, even # of pins 852-xx-_ _ _-30-001000 fig. 2 specify even # of pins 004-100 single row header, right hand footprint even # of pins 850-xx-0_ _-30-002000 fig. 1r specify even # of pins 02-50 single row header, left hand footprint odd or even # of pins 850-xx-0_ _-30-001000 fig. 1l specify # of pins 01-50 fig. 1 fig. 2 fig. 3 fig. 4 specify plating code xx= 13 93 99 43 44 sleeve (pin) contact (clip) 10? au 200? sn/pb 200? sn/pb 200?sn 200?sn 30? au 30? au 200? sn/pb 30? au 200?sn pin plating 10 ? au 200 ? sn/pb 200 ?sn specify plating code xx= 10 90 40 coplanarity .005?. for pin counts > 20 consult tech support coplanarity .005?. for pin counts > 40 consult tech support coplanarity .005?. for pin counts > 20 consult tech support coplanarity .005?. for pin counts > 40 consult tech support ? single row intercon- nects having an even number of pins are now available with a left or right hand footprint. ? headers (850 & 852) use mm# 4006 pins. see page 166 for details. ? sockets (851 & 853) use mm# 4890-0 receptacles and accept pin diameters from .015-.021. see page 129 for details. ? coplanarity .005? (single row max 20 pins; double row max 40 pins) for higher pin counts contact tech support . ? insulators are high temp. thermoplastic. 2 o ( 3 % # for rohs compliance select plating code. 44 plating non-standard 44 plating non-standard
|